Doorbell panel with ten buttons
Ten call buttons on one module for the VTO4202 series. This lets you serve a small apartment building with a single block.
What you can count on
- Ten call buttons: the largest layout in the range, with name windows
- Power supply via the main module: 5 volts, supplied by the adjacent module, so no connection of its own
- Aluminium: silver finish, IK07 and IP65
What to look out for
This module belongs to the VTO4202 series, which works on IP with PoE or 2-wire. For the VTO4103 series there is a separate version with the same function. So first check which main module you have or are choosing.
The IP65 rating only applies once the housing has been sealed with silicone sealant during installation.
The details at a glance
| Function | Doorbell panel, 10 buttons |
| Series | VTO4202 (IP with PoE or 2-wire) |
| Colour | Silver |
| Dimensions | 100 x 100 mm (entire module) |
| Power supply | 5 VDC via the main module |
| Consumption | Maximum 0.5 W |
| Protection | IK07 and IP65 |
| Operating temperature | -30 to +60 degrees |
| Model code | VTO4202F-MDB10 |
The full specification is in the Dahua datasheet.
Frequently asked questions
From how many homes should I choose this one?
From around six homes, this becomes the practical choice. Below that, separate modules are easier to follow and cheaper.
Can I place two next to each other?
Yes, for twenty homes. Do keep an eye on the switch limit: twenty indoor stations per switch.
Does this module need its own power supply?
No. The modules receive 5 volts from the main module via the small cables between them. You only connect the main module.
Is an enclosure included?
No. You choose the housing based on the total number of modules in your setup, and you order it separately. Let us know how many modules you have and we will find the matching one.
