Wired blue LED strobe: eye-catching signal on alarm
A powerful blue LED flasher that you mount indoors or outdoors and have light up when an alarm is triggered. This makes it immediately clear in the neighbourhood that something is wrong. You connect it to your Ajax system via an Ajax Relay or Socket with a 12 V adapter.
Why this flasher
Powerful light
Six 3 W LEDs with 21 selectable flash patterns, clearly visible indoors and outdoors.
Water and vibration resistant
Aluminium housing with a waterproof design, IP67 and IP69K, for indoor and outdoor mounting.
Simple wiring
Four wires for plus, minus, sync and pattern, with reverse polarity protection.
Quick installation
Pop-in installation with an optional flange kit for surface mounting, which is supplied as standard.
Pairing with your Ajax system
Connect the flasher to an Ajax Relay or Ajax Socket with a 12 V adapter. With the Relay, you create two scenarios: one for an alarm and one for when the alarm is switched off. You can also choose a single scenario with a pulse of up to 255 seconds. The Socket is simpler: plug the adapter into the Socket and set up the scenarios. You can see exactly how to connect it in the product image below.
When ordering, you choose from three options:
Option 1: flasher only
Strobe only, for if you already have a Relay or Socket with a power supply.
Option 2: strobe + Relay + 12 V adapter
High skill level: connect according to the wiring diagram in the drawing.
Option 3: flasher + Socket white + 12 V adapter
Skill level low: plug the smart plug into the wall socket, connect the power supply to it and connect the plus and minus of the flasher.
Connection and operation
Technical specifications
| Type | Wired blue LED flasher for indoor and outdoor use |
| LEDs | 6x 3 W |
| Flash patterns | 21 selectable, remembers the last pattern used |
| Power supply | DC 12 to 24 V (12 V: 0.5 A / 24 V: 0.28 A, depending on pattern) |
| Connection | 4 wires (positive, negative, sync, pattern), reverse polarity protection |
| Synchronisation | Up to 15 units can be paired |
| Protection class | IP67 and IP69K, water and vibration resistant |
| Certifications | ECE R65 Class 1, ECE R10, CE, UKCA, complies with CISPR 25 Class 3 |
| Dimensions | 39 x 39 x 28 mm |
| Operating temperature | -30 to +60 °C |
| Warranty | 2 years |
Ivan De Meyer (verified owner) –
Works very well, bright flasher
JCK (verified owner) –
Bright flashes