Intercom post for two modules
A free-standing post with a housing for the door station, for when there is no wall to mount the station on: at a gate, a driveway or a free-standing entrance.
The post is made of steel and just over 1.3 metres high, so the camera is at face height. There is room for two modules. The front panel is a separate item: VTM125 goes with this post.
What you can count on
- Free-standing installation: at a gate or driveway, without a wall
- Room for two modules: the camera module counts as one
- Steel: silver finish, for outdoor use
- Front separate: VTM125 belongs with this
The front panel is not included
The housing and the front panel are two separate items. The box contains only the housing; the front panel must be ordered in addition.
These housings are designed for Dahua modular door stations. If you are not sure whether your modules fit, please send us the model type and we will check.
The details at a glance
| Function | Intercom post |
| Number of modules | 2 |
| Material | Steel |
| Colour | Silver |
| Dimensions | 1370,2 x 180,0 x 191,8 mm |
| Weight | 4,55 kg |
| Front | VTM125 |
| Model code | VTM51R2 |
The full specification is in the Dahua datasheet.
Frequently asked questions
Where do I place a post like this?
For an entrance without a wall: a gate, a barrier or a driveway. Allow for a foundation or a ground anchor, because the post must stand firmly and is touched at every visit.
How does the cabling go in?
Through the post, from below. Lay the cable at the same time while the trench is open; digging afterwards is considerably more work.
Is the front panel included?
No. Order VTM125 with it.
Does a card reader or code panel also fit this post?
Yes, as long as you stay within two modules. The camera module is one of them, so there is room for one extra module next to it.
