Complete IP intercom for flush mounting, with PoE switch
A set that works over the network: door station, 7 inch indoor monitor, a PoE switch and the flush-mounting box. The switch powers both stations over the same network cable, so you do not need separate power supplies.
The door station is built for outdoor use in all weather: IK08 impact protection and an operating range of -40 to +60 degrees.
What is in the box
The set consists of the following components:
- VTO2201F-P-S2: the door station with a 2 megapixel camera
- VTH2421FW-P: the indoor monitor, 7 inch touchscreen in white
- PFS3005-4ET-36E: the PoE switch that powers both stations
- VTM114: the flush-mounting box for the door station
What you can count on
- PoE switch included: power and connection over the same network cable, for both stations
- Wide angle: 168 degrees horizontally, with WDR against strong backlight
- Robust construction: IK08 and an operating range of -40 to +60 degrees
- Omnidirectional microphone: the indoor monitor picks up sound from all directions
- 12 volt output: 600 mA, for example for an electric lock
What to look out for
This is the flush-mounting version: the door station sits flat in the wall. This requires chiselling or routing work in the facade.
The IP65 rating only applies once the unit has been sealed with silicone sealant during installation.
An electric door opener is not included.
The details at a glance
| System | IP with PoE |
| Camera | 2 megapixel, 168 degrees |
| Image enhancement | WDR 120 dB |
| Indoor unit | 7 inch, 1024 x 600, white |
| Switch | PoE, included |
| Mounting | Flush mounting, box included |
| Protection | IP65 and IK08 |
| Operating temperature | -40 to +60 degrees |
| Model code | KTP01L(F) S2 |
The full specification is in the Dahua datasheet.
Frequently asked questions
Do I still need a power supply?
No. The PoE switch in the kit powers both the door station and the indoor monitor over the network cable. Only the switch itself plugs into the mains socket.
What cabling do I need?
One network cable from the switch to the door station and one to the indoor monitor. If there is only a two-core doorbell cable, look at a 2-wire set instead.
What does flush mounting mean?
The door station is mounted flush in the facade, in the box supplied. This looks neater than surface mounting, but it does require chiselling work.
Can I add a second indoor monitor?
Yes, the switch has free ports for this. Let us know how many screens you want, and we will check whether it fits.
Reviews
There are no reviews yet.