Dahua CS4006-4GT-60-V2 Cloud Managed 4x Gb PoE 60W 2x Gb Uplink
The Dahua CS4006-4GT-60-V2 is a compact and powerful PoE switch for professional network and camera applications. With 4 Gigabit PoE ports, 2 Gigabit uplink ports and a total PoE budget of 60 W, this switch combines performance with simple management.
What you can do with it
This managed PoE switch is a Layer 2 network switch with 4 RJ45 Gigabit PoE ports and 2 RJ45 Gigabit uplink ports. Port 1 supports Hi-PoE up to 60 W, while ports 2 to 4 deliver up to 30 W per port. This Gigabit PoE switch also supports Long Distance PoE up to 250 metres at 10 Mbps. The Dahua CS4006-4GT-60-V2 offers flexible management, stable power for connected equipment and useful functions such as VLAN, Port Isolation, Storm Control and Loop Prevention. With the DIP switch you can quickly change between modes such as Cloud Managed, PoE Watchdog and Long Distance Mode.
What this switch does
- 4 Gigabit PoE ports and 2 Gigabit uplink ports with a total PoE budget of 60 W
- Hi-PoE on port 1 up to 60 W, suitable for more demanding PoE devices
- Cloud management via DoLynk and a local web interface with logs and error messages
- PoE Watchdog automatically restarts a PoE port when there is no traffic
- Metal housing, 6 kV surge protection and Long Distance PoE up to 250 metres
The details at a glance
| PoE ports | 4 |
| PoE budget | 60 W |
| Uplinks | 4 |
| Management | cloud, via DoLynk Care |
| Cable range | up to 250 m in extend mode |
| Model code | CS4006-4GT-60-V2 |
The full specification is in the Dahua datasheet.
What you will receive
- Dahua CS4006-4GT-60-V2 Cloud Managed 4x Gb PoE 60W 2x Gb Uplink
- External power adapter
- Documentation
Tip: Use CAT5e or CAT6 cabling to achieve the best performance and support for longer PoE distances.
Frequently asked questions
How many cameras can I power with this?
This switch has 4 PoE ports with a combined 60 W. Add up the power consumption of your cameras and stay below that figure. A standard bullet or dome camera uses around 6 to 12 W, a PTZ camera or a camera with illumination considerably more.
Do I still need a power supply for each camera?
No. With PoE, power and data run over the same network cable, so you do not need a power socket at the camera. Only the switch itself is connected to the mains.
Do I need to configure the switch?
Not for ordinary use: connecting it is enough. If you want to monitor it remotely or manage the ports, you register it in DoLynk Care.
Which cable do I need?
Network cable of at least category 5e, installed as fixed wiring. For outdoor use or underground, choose a cable that is made for that purpose. If you are unsure, call or email us and we will help you decide.
