Build M&C cylinders to size

Yes. With the M&C Security Card that comes with your set, we order extra keys or a cylinder on the same key. Without that card this is not possible; this keeps your key protected against copying. You do this via reorder keys and cylinders: you upload a photo of the card and choose what you want to add.

A set of cylinders that all open with the same key, for example front door, back door and shed. You then need only one key on your keyring. Each cylinder in the set can have its own size, colour and operation; M&C makes them together on one key. A rim lock or padlock can also be part of the same set.

Do not remove the cylinder from the door; measure it in the lock. Measure from the centre of the cylinder screw in the edge of the door outwards to the flat side of the hardware: that is dimension A. Do the same inwards: dimension B. You note it as outside / inside, for example 32 / 37. If the cylinder protrudes more than 3 mm on the outside, choose a size shorter. In the configurator, the How do I measure? button helps you with a drawing.

With one cylinder you receive 3 keys, with two or three cylinders 5, with four or five 7, and from six cylinders 8 (with the Matrix 2 it stays at 7). The configurator shows the exact number under Keys. You can order extra keys at the same time.

Yes. Above the largest standard set, M&C pins the extra cylinders to the same key. A small surcharge applies per extra cylinder, which you will see as a separate line in Your set. The number of keys then no longer grows; extra keys are ordered separately.

The Matrix 3 has three SKG stars and is itself protected against core pulling, drilling and lock picking. The Matrix 2 has two stars and no core-pull protection of its own; choose it for a door with hardware that already protects the core, or for interior doors. Both have a cut key with a special undercut and work together in one locking system.

A half cylinder has a key or knob on one side only, for example for a garage door, a meter cupboard or a key switch. You select it by setting the outside measurement A to 10; the inside measurement B is then the length of the cylinder. A half cylinder does not get its own keys; they come with the set.

All series here are Euro profile cylinders, the standard in Dutch doors. They fit almost any mortice lock and multi-point lock with a profile cylinder. Only for locks with gear drive or a non-standard cam do you need a different cam; call us if you are unsure.

Yes. You choose the colour per cylinder, so black on the front door and nickel in the shed can be part of the same keyed-alike set. Which colours are available differs per series.

A made-to-measure set is produced specially for you and is therefore excluded from the right of withdrawal. Please measure carefully, or call us before you order: we are happy to help. A standard set of 32 / 32 mm in nickel without options can be returned. For how this works, see returns and withdrawal.

M&C makes the set after your order. Allow 1 to 3 working days. You will receive an email with Track & Trace as soon as it is on its way. Shipping costs and delivery are covered under delivery time and shipping costs.

Yes. Under Operation, choose the knob part for your smart lock; the cylinder is then prepared for that Nuki, Tedee or Danalock. The smart lock itself is ordered separately, for example a Tedee PRO. The outside continues to work with the key.