Display module with name list
A display module for the VTO4202 series that shows the resident list. The visitor looks up the name and rings, without the need for a button for every home.
What you can count on
- Name list on the screen: no button per dwelling needed
- Changes without a screwdriver: you enter a new resident in the system, so you do not need to replace a name card
- Power supply via the main module: 5 volts, supplied by the adjacent module, so no connection of its own
- Aluminium: black version, IK07 and IP65
What to look out for
This module belongs to the VTO4202 series, which works on IP with PoE or 2-wire. For the VTO4103 series there is a separate version with the same function. So first check which main module you have or are choosing.
The IP65 rating only applies once the housing has been sealed with silicone sealant during installation.
The details at a glance
| Function | Display module |
| Series | VTO4202 (IP with PoE or 2-wire) |
| Colour | Black |
| Dimensions | 100 x 100 mm (entire module) |
| Power supply | 5 VDC via the main module |
| Consumption | Maximum 0.5 W |
| Protection | IK07 and IP65 |
| Operating temperature | -30 to +60 degrees |
| Model code | VTO4202FB-MS |
The full specification is in the Dahua datasheet.
Frequently asked questions
When should I choose this over doorbell buttons?
For buildings with many homes, or with changing residents. You can adjust a name list on the screen without opening the intercom panel.
Does the screen also work in the dark?
Yes, it is illuminated. In bright sunlight, however, a screen is harder to read than a card behind glass.
Does this module need its own power supply?
No. The modules receive 5 volts from the main module via the small cables between them. You only connect the main module.
Is an enclosure included?
No. You choose the housing based on the total number of modules in your setup, and you order it separately. Let us know how many modules you have and we will find the matching one.
