Corner bracket for the VTO2202F-P-S3 and the VTO2211G-WP-S2
A bracket that mounts the door station on the wall at an angle. Useful when the station does not face the visitor directly: on a side wall, in a porch or in a narrow entrance, the camera would otherwise look past everyone.
The bracket turns the station horizontally, so that the image is aimed at the door or the visitor instead of at the façade next to it.
When you need it
- Station on a side wall: otherwise the camera looks past the visitor
- Narrow entrance or porch: the visitor stands close to the station and falls outside the picture
- For the VTO2202F-P-S3 and the VTO2211G-WP-S2: made to fit this series
- Sold separately: the door station and the mounting box are not included
The details at a glance
| Function | Corner bracket |
| For | VTO2202F-P-S3 and the VTO2211G-WP-S2 |
| Mounting | At an angle on the wall |
| Model code | VTM98A |
The full specification is in the Dahua datasheet.
Frequently asked questions
Why would I use a corner bracket?
Because a camera that looks parallel to the wall does not capture the visitor. If the station is on a side wall or in a recess, the bracket turns the image the right way.
Is the mounting box included?
No. The bracket is a separate part; the box and the door station are ordered separately.
Does this bracket fit another door station?
No, it is for the VTO2202F-P-S3 and the VTO2211G-WP-S2. If in doubt, please give us your model type.
Reviews
There are no reviews yet.