Dahua CHS4106-4ET-60 4x PoE 100Mbps 1Gbps+SFP uplink Cloud Switch
Looking for a reliable, affordable and powerful PoE switch for cameras, access points or intercoms? The Dahua CHS4106-4ET-60 delivers exactly what is needed. This compact cloud switch combines 4x PoE with Hi-PoE up to 60W on port 1, smart monitoring via PoE Watchdog and a 1Gbps RJ45 and SFP uplink for fast and stable connections. Thanks to cloud management via the DoLynk Care app, you have immediate insight and control, including warnings and notifications.
What this switch does
- Value and reliability in one: professional performance without high costs.
- Ready for security cameras and Wi-Fi straight away: 4x PoE with Hi-PoE up to 60W on port 1.
- Cloud management via DoLynk Care: remote management, notifications and a clear network overview.
- PoE Watchdog: automatic recovery from PoE faults for maximum uptime.
- Extend mode up to 250 metres: ideal when power sockets or cabling are limited.
- Robust industrial design: metal housing, IP30, IK06 and protection against ESD and overvoltage.
- Flexible management: can be used as a managed switch or simply as an unmanaged switch.
- Low power consumption: only 1.7 W when idle, up to 65 W maximum.
The details at a glance
| PoE ports | 4 |
| PoE budget | 60 W |
| Uplinks | 1 |
| Management | no configuration required |
| Cable range | up to 250 m in extend mode |
| Model code | CHS4106-4ET-60 |
The full specification is in the Dahua datasheet.
What you will receive
- Dahua CHS4106-4ET-60 Cloud PoE Switch
- DIN rail holder/clip and mounting materials
- DC terminal block
- Quick start guide and documentation
Frequently asked questions
How many cameras can I power with this?
This switch has 4 PoE ports with a combined 60 W. Add up the power consumption of your cameras and stay below that figure. A standard bullet or dome camera uses around 6 to 12 W, a PTZ camera or a camera with illumination considerably more.
Do I still need a power supply for each camera?
No. With PoE, power and data run over the same network cable, so you do not need a power socket at the camera. Only the switch itself is connected to the mains.
Do I need to configure the switch?
No, you connect it and it does its job. There is no web interface in which you need to configure anything.
Which cable do I need?
Network cable of at least category 5e, installed as fixed wiring. For outdoor use or underground, choose a cable that is made for that purpose. If you are unsure, call or email us and we will help you decide.
Reviews
There are no reviews yet.