Door station with keypad for a villa
An aluminium outdoor station with a 2 megapixel camera and a keypad, so that residents can enter with a code. It works on both a network cable and two wires, which makes it suitable for new builds and for replacing an existing installation.
With IK08 impact resistance, this is one of the sturdier versions. That matters for a station that is mounted on the street side.
What you can count on
- Access with a code: the keypad is built into the station, so you do not need a separate code panel
- Two locks: the station can control two locks, for example a front door and a gate
- Wiegand and RS485: for linking to an existing door controller or access control system
- Alarm input and output: one channel each, for example for a door contact or tamper alert
What to look out for
The IP65 rating only applies after the housing has been sealed with silicone sealant during installation. This is stated in the manual and is often skipped.
An electric door opener is not included. The station can control two, but the lock itself belongs to the door hardware.
The details at a glance
| Camera | 2 megapixel |
| Access | Code |
| Connection | PoE or 2-wire |
| Locks | 2 |
| Gates | Wiegand, RS485, alarm input and output |
| Housing | Aluminium |
| Protection | IP65 and IK08 |
| Mounting | Surface or flush mounting |
| Model code | VTO3222E-P |
The full specification is in the Dahua datasheet.
Frequently asked questions
Can I connect it to my existing doorbell wiring?
Yes, this station also works over two wires. Note the maximum distance of 50 metres between the 2-wire switch and the station. Let us know your cable length if you are unsure.
Does the code work without an indoor monitor?
Yes. The code is processed in the station itself, so residents can enter even if no indoor station is installed or if it is switched off.
Do I need a separate housing?
Yes, there is a separate mounting box for surface and for flush mounting. You order it separately; tell us which mounting you want and we will find the right one.
Can I use it to open a gate?
Yes, the station controls two locks. A gate motor usually needs a potential-free contact; this is possible via the RS485 expansion.
Reviews
There are no reviews yet.