Dahua CHS4206-4GT-60 4xPoE 2xSFP Gigabit Cloud Managed Switch (60W)
The Dahua CHS4206-4GT-60 is a compact and powerful PoE switch for IP cameras, access points and VoIP applications. With 4 Gigabit PoE ports and 2 SFP uplinks, you can easily build a stable and scalable network.
What you can do with it
The Dahua CHS4206-4GT-60 is a 6-port Gigabit switch with 4 RJ45 PoE ports and 2 SFP uplinks. You manage it locally via the web interface or centrally via the cloud, and a slide switch also allows the switch to be used as an unmanaged model. Port 1 supports Hi-PoE up to 60 W, ports 2 to 4 deliver up to 30 W per port and the total PoE budget is 60 W. With support for VLAN, STP/RSTP, Link Aggregation, LLDP and PoE Watchdog, you choose control, continuity and ease of use.
What this switch does
- 4 × Gigabit PoE ports and 2 × SFP uplinks for flexible network connection
- Hi-PoE up to 60 W on port 1 and a total PoE budget of 60 W
- Cloud management and local web management, plus managed/unmanaged switching
- Long-range PoE up to 250 metres at reduced speed
- Robust, quiet metal housing with IP30, IK06 and fanless design
The details at a glance
| PoE ports | 4 |
| PoE budget | 60 W |
| Uplinks | 2 |
| Management | cloud, via DoLynk Care |
| Model code | CHS4206-4GT-60 |
The full specification is in the Dahua datasheet.
What you will receive
- Dahua CHS4206-4GT-60 switch
- External power adapter (48-57 VDC)
- Quick start guide/documentation
Frequently asked questions
How many cameras can I power with this?
This switch has 4 PoE ports with a combined 60 W. Add up the power consumption of your cameras and stay below that figure. A standard bullet or dome camera uses around 6 to 12 W, a PTZ camera or a camera with illumination considerably more.
Do I still need a power supply for each camera?
No. With PoE, power and data run over the same network cable, so you do not need a power socket at the camera. Only the switch itself is connected to the mains.
Do I need to configure the switch?
No, you connect it and it does its job. There is no web interface in which you need to configure anything.
Which cable do I need?
Network cable of at least category 5e, installed as fixed wiring. For outdoor use or underground, choose a cable that is made for that purpose. If you are unsure, call or email us and we will help you decide.
Is the switch quiet in use?
Yes, thanks to the fanless design it runs silently.
Reviews
There are no reviews yet.