Dahua IS4210-8GT-120 Managed industrial Gigabit switch, 8x PoE ports, 2x SFP Excl. power supply
The Dahua IS4210-8GT-120 is a powerful solution for stable network connections in demanding environments. This industrial PoE switch combines 8 Gigabit RJ45 ports with 2 SFP uplinks for flexible connection of network equipment.
What you can do with it
The Dahua IS4210-8GT-120 is a Layer 2 managed industrial Gigabit switch with 8 PoE ports and 2 SFP ports of 1000 Mbps. The switch offers a capacity of 20 Gbps, supports dual power input for redundancy and is designed for reliable data and power supply within a single network solution. This managed industrial switch offers extensive control, high reliability and flexible deployment. Ports 1 and 2 support up to 90 W, ports 3 to 8 up to 30 W, with a total PoE budget of up to 120 W. In addition, features such as LACP, IGMP Snooping, DHCP functions, ACL and IEEE 802.1X make for a more efficient and more manageable network.
What this switch does
- 8 x RJ45 10/100/1000 Mbps PoE ports and 2 x SFP 1000 Mbps uplink ports
- Supports IEEE802.3af, IEEE802.3at, Hi-PoE and IEEE802.3bt
- Layer 2 management with web interface, SNMP, Telnet and CLI
- STP, RSTP and ERPS for network redundancy and stability
- Dual power input, VLAN configuration and link aggregation via static or LACP
The details at a glance
| PoE ports | 8 |
| PoE budget | 30 W |
| Uplinks | 2 |
| Management | configurable via the web interface |
| Model code | IS4210-8GT-120 |
The full specification is in the Dahua datasheet.
What you will receive
- Dahua IS4210-8GT-120 Managed industrial Gigabit switch
- Brief documentation
- Standard mounting materials supplied, if included by the manufacturer
Frequently asked questions
How many cameras can I power with this?
This switch has 8 PoE ports with a combined 30 W. Add up the power consumption of your cameras and stay below that figure. A standard bullet or dome camera uses around 6 to 12 W, while a PTZ camera or a camera with lighting uses considerably more.
Do I still need a power supply for each camera?
No. With PoE, power and data run over the same network cable, so you do not need a power socket at the camera. Only the switch itself is connected to the mains.
Which cable do I need?
Network cable of at least category 5e, installed as fixed wiring. For outdoor use or underground, choose a cable that is made for that purpose. If you are unsure, call or email us and we will help you decide.
Is this switch managed?
Yes, management is possible via web, SNMP, Telnet and CLI.
