Purpose
Dahua VTO4202FB-P1 Video Intercom Camera Main module with call button PoE and 2-wire
Video Intercom Camera Main Module with call button, PoE and 2-Wire from Dahua. Made of aluminium, colour silver, powered via 12 VDC, 2 A, PoE (802.3af/at), Dahua 2-wire switch (max. power supply distance is 50 m).
Features
What you can count on
- Full HD 2MP camera with a 168-degree viewing angle
- Suitable for PoE and 2-wire
- Aluminium housing
- Suitable for flush and surface mounting
- IP65 and IK07
- Expandable with 8 sub-modules
- Up to 200 indoor stations per system
- Maximum of 10 outdoor stations per system
Specifications
The details at a glance
| Main processor | Built-in processor |
| Operating system | Built-in Linux operating system |
| Button type | Mechanical |
| Number of buttons | 1 |
| Interoperability | CGI; ONVIF |
| Network protocol | UDP; TCP; IPv4; DNS; RTSP; UPnP; SIP; P2P; RTP |
| Camera | 1/2.9″ 2 MP CMOS |
| Field of view | H: 168.6 degrees; V: 87.1 degrees; D: 176.7 degrees |
| WDR | 120 dB |
| Noise reduction | 3D NR |
| Video compression | H.265; H.264 |
| Video resolution | Main stream: 720p; WVGA; D1; CIF, Sub stream: 1080p; WVGA; D1; QVGA; CIF |
| Video frame rate | 25 fps |
| Video bit rate | 256 Kbps to 8 Mbps |
| Model code | VTO4202FB-P1 |
The full specification is in the Dahua datasheet.
Questions
Frequently asked questions
Can this be installed outdoors?
Yes, the housing is IP65 and is therefore suitable for outdoor use. Make sure the cable enters through the cable gland, so that no moisture reaches the connection.
What do I use to mount this?
Intended for flush mounting; surface mounting. Use screws and wall plugs that suit the surface; the manual states which size is required.
Does this fit my model?
The models this part fits are listed in the Dahua datasheet. If you are unsure, call or email us with the model you have and we will look it up.
