Dahua CS4228-24GT-375 24x PoE Gigabit Cloud Managed Switch (375W)
The Dahua CS4228-24GT-375 is a powerful PoE switch for professional network environments. With 24 Gigabit PoE ports, 2 additional RJ-45 uplinks and 2 SFP uplinks, this switch offers many connection options for cameras, access points and other network equipment.
What you can do with it
This is a layer-2 Gigabit smart managed switch with a total PoE budget of up to 375 W. Ports 1 and 2 support up to 90 W, while ports 3 to 24 deliver up to 30 W per port. The switch supports STP/RSTP, port-based VLAN, web management and app management. The Dahua CS4228-24GT-375 combines high performance with ease of use. With a switching capacity of 56 Gbps, packet forwarding of 41.66 Mpps, long-distance PoE transmission and support for IEEE802.3af/at/bt and Hi-PoE, this is a reliable choice for modern IP networks.
What this switch does
- 24 x RJ-45 Gigabit PoE ports, 2 x RJ-45 uplink and 2 x SFP uplink
- Maximum PoE budget of 375 W with support for Hi-PoE and IEEE802.3bt
- Suitable for Dahua Dolynk with web management and app management
- Layer 2 functionality with STP/RSTP, VLAN and IEEE 802.3x Flow Control
- No complex configuration required for quick commissioning
The details at a glance
| PoE ports | 24 |
| PoE budget | 375 W |
| Uplinks | 2 |
| Management | cloud, via DoLynk Care |
| Model code | CS4228-24GT-375 |
The full specification is in the Dahua datasheet.
What you will receive
- Dahua CS4228-24GT-375 24x PoE Gigabit Cloud Managed Switch (375W)
- Built-in power supply
- Manual
Frequently asked questions
How many cameras can I power with this?
This switch has 24 PoE ports with a combined 375 W. Add up the power consumption of your cameras and stay below that figure. A standard bullet or dome camera uses around 6 to 12 W, while a PTZ camera or a camera with lighting uses considerably more.
Do I still need a power supply for each camera?
No. With PoE, power and data run over the same network cable, so you do not need a power socket at the camera. Only the switch itself is connected to the mains.
Do I need to configure the switch?
Not for ordinary use: connecting it is enough. If you want to monitor it remotely or manage the ports, you register it in DoLynk Care.
Which cable do I need?
Network cable of at least category 5e, installed as fixed wiring. For outdoor use or underground, choose a cable that is made for that purpose. If you are unsure, call or email us and we will help you decide.
Can I use this switch with Dahua Dolynk?
Yes, this switch is suitable for Dahua Dolynk.
